----ASTM Volume 05.05, February 2024
C1025-15(2020) | Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite |
C1039-85(2020)e1 | Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes |
C1179-21 | Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air |
C559-16(2020) | Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles |
C560-20 | Standard Test Methods for Chemical Analysis of Graphite |
C561-23 | Standard Test Method for Ash in a Graphite Sample |
C562-23 | Standard Test Method for Moisture in a Graphite Sample |
C565-15(2021) | Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials |
C611-21 | Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature |
C625-15(2021) | Standard Practice for Reporting Irradiation Results on Graphite |
C651-20 | Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature |
C662-16(2021) | Standard Specification for Impervious Graphite Pipe and Threading |
C695-21 | Standard Test Method for Compressive Strength of Carbon and Graphite |
C714-23 | Standard Guide for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method |
C747-23 | Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance |
C748-20 | Standard Test Method for Rockwell Hardness of Graphite Materials |
C749-15(2020) | Standard Test Method for Tensile Stress-Strain of Carbon and Graphite |
C769-15(2020)e1 | Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus |
C781-20 | Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components |
C783-85(2020) | Standard Practice for Core Sampling of Graphite Electrodes |
C808-75(2021) | Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials |
C816-15(2020)e1 | Standard Test Method for Sulfur Content in Graphite by Combustion- Iodometric Titration Method |
C838-16(2023) | Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes |
C886-21 | Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials |
D7219-19 | Standard Specification for Isotropic and Near-isotropic Nuclear Graphites |
D7301-21 | Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose |
D7542-21 | Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime |
D7775-21 | Standard Guide for Measurements on Small Graphite Specimens |
D7779-20 | Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature |
D7846-21 | Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites |
D7972-14(2020) | Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature |
D8075-16(2021) | Standard Guide for Categorization of Microstructural and Microtextural Features Observed in Optical Micrographs of Graphite |
D8091-21 | Standard Guide for Impregnation of Graphite with Molten Salt |
D8093-19 | Standard Guide for Nondestructive Evaluation of Nuclear Grade Graphite |
D8186-18 | Standard Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP OES) |
D8255-19 | Standard Guide for Work of Fracture Measurements on Small Nuclear Graphite Specimens |
D8289-20 | Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite |
D8325-20 | Standard Guide for Evaluation of Nuclear Graphite Surface Area and Porosity by Gas Adsorption Measurements |
D8356-20 | Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio |
D8377-21a | Standard Guide for High Temperature Strength Measurements of Graphite Impregnated with Molten Salt |
Commentaires